HIKVISION DS-1100KI(B) - Import Input Channels in Batches

4. Check or uncheck Add Video Recorder Output as desired.
Note
Check Add Video Recorder Output, and the output port type, channel number and other
informaon will be listed in the output port list.
5. Oponal: In Device Management interface, click Add SADP, enter user name and password,
check the device to be added, and click OK to add online devices on the same network segment.
Figure 8-4 Add SADP
Note
• SADP search can only add devices in the same network segment.
•
Aer adding devices in batches by SADP, you need to refresh manually to get the added
devices.
8.2.2 Import Input Channels in Batches
Before You Start
1. Add several devices manually. Go to Channel Management → Input Channel , click Export,
enter password, and then export channel informaon.
2. Edit the device channel informaon based on the exported template, and save the exported
channel informaon into the local PC.
Steps
1. Go to Channel Management → Input Channel .
2. Click Import.
DS-1100KI(B) Network Keyboard User Manual
50