HIKVISION DS-1100KI(B) - System Maintenance

Cauon
We highly recommend you create a strong password of your own choosing (Using a minimum of
8 characters, including at least three of the following categories: upper case leers, lower case
leers, numbers, and special characters.) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your product.
4. Check devices to be linked as desired and click OK.
Note
• Keyboard supports up to 32 users: 1 administrator and 31 operators.
• The operator can only operate on the devices allocated.
5. Oponal: Click Edit, uncheck the devices to be unlinked and click OK to unlink the devices.
8.6.3 System Maintenance
Go to System Management → System Maintenance to restart the device, restore defaults, export/
import
conguraon le, etc.
Note
Restoring default sengs, imporng/exporng conguraon les, and remote upgrades require
the administrator password to be veried.
Restart
You can restart the network keyboard.
Restore Defaults
• Simply Restore: Keep the acvaon state (administrator password) and the network parameters
of the network keyboard, and the remaining parameters will be restored to the default sengs.
• Completely Restore: Completely restore the parameters to default sengs.
Import/Export Conguraon File
You can export the conguraon le to the computer or import the conguraon le from the
computer to the keyboard. In case of keyboard failure, you need to back up the data by exporng
the conguraon le rst, and then repair the failure. To copy the data of this keyboard to another
keyboard, you can also import/export the conguraon le.
DS-1100KI(B) Network Keyboard User Manual
56