Figure 4-22 Connect Video Recorder (PTZ Disabled)
Figure 4-23 Connect Video Recorder (PTZ Enabled)
4.9.2 Connect Analog Matrix
The keyboard can be connected to the analog matrix through RS-232 serial port.
Steps
1. Connect the analog matrix to the RS-232 interface on the keyboard.
2. Enter Serial Port Control, select Analog Dome/Analog Matrix, and tap OK.
3. Tap
on the upper-right corner and select RS232.
4. Set the parameters of RS232 serial port.
DS-1100KI(B) Network Keyboard User Manual
31
To Next Page
Loading...
