HIKVISION DS-1100KI(B) - SADP Activation; Web Activation

2.2 SADP Acvaon
SADP soware is used for detecng the online device, acvang the device, and reseng its
password.
Get the SADP soware from the supplied disk or the ocial website, and install the SADP
according to the prompts.
Steps
1. Connect your network keyboard power supply to an electrical outlet, and turn on the network
keyboard.
2. Run the SADP
soware downloaded from our website to search the online devices.
3. Check the keyboard status from the device list, and select the inacve keyboard.
4. Enter the new password in the password
eld, and conrm it.
Warning
• 8 to 16 characters allowed, including at least two of the following: digits, upper case
leers,
lower case leers and special characters.
• STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password
of your own choosing (using a minimum of 8 characters, including upper case
leers, lower
case
leers, numbers, and special characters) in order to increase the security of your
product. And we recommend you reset your password regularly, especially in the high
security system, reseng the password monthly or weekly can beer protect your product.
5. Click Acvate.
2.3 Web
Acvaon
Aer eding the PC and the network keyboard to the same network segment, you can directly log
in to the web interface of the network keyboard to
acvate.
DS-1100KI(B) Network Keyboard User Manual
3