HIKVISION DS-1100KI(B) - Video Wall Operation; Region Configuration

6.4 Video Wall Operaon
6.4.1 Region Conguraon
The whole video wall can be divided into dierent regions for management.
Steps
1.
Tap on the upper-right corner.
2. Tap .
Figure 6-5 Add Region
3. Enter video wall ID, start and end coordinates.
4. Tap OK.
Note
• Up to 16 regions are supported.
• The maximum region
specicaon is 6 × 8.
• If you do not
congure the region, region 1 corresponds to video wall 1, region 2 corresponds
to video wall 2, and region 16 corresponds to video wall 16 by default.
DS-1100KI(B) Network Keyboard User Manual
42