HIKVISION DS-1100KI(B) - PTZ Control

Note
• You can preview the channel with up to 4K
resoluon.
• Press Num+CAM to control PTZ without previewing images from speed domes.
• The captured image and the recording can be saved in USB
ash drive or uploaded to FTP
server. For FTP conguraon, see Storage .
4.3.3 PTZ Control
You can control the added speed dome, like control PTZ movement, turn
on/o light, turn on/o
wiper, zoom in/out, increase/decrease focus, increase/decrease iris, set/call preset, patrol and
paern.
General
Operaon
Steps
1. Preview speed dome image.
Note
For detailed steps, see Preview by Operang Touchscreen and Preview by Operang Keyboard
Shortcut .
2. Move joysck and press buons of keyboard to control PTZ.
Table 4-1
Buons Descripon
Buon Descripon Buon Descripon
LIGHT Turn on/o light. WIPER Turn on/o wiper.
FOCUS+ Increase focus. FOCUS- Decrease focus.
IRIS+ Increase iris. IRIS- Decrease iris.
ZOOM+ Zoom in. ZOOM- Zoom out.
PRESET Set/call preset. PATROL Set/call patrol.
PATTERN Set/call paern and
start/stop auto-scan.
Joysck Rotate PTZ.
Set and Call Preset
You can record the horizontal posions, vercal posions and lens magnicaon of the preset
point by seng a preset point. To quickly monitor a certain target, you can call out the preset
posion by operang the keyboard.
DS-1100KI(B) Network Keyboard User Manual
11