HIKVISION DS-1100KI(B) - Camera Group

Code stream for local live view and video wall preview.
Transmission Protocol
Available for video wall preview.
4. Click OK.
8.3.2 Camera Group
Camera group enables you to preview a group of cameras (input channels) in sequence.
Steps
1. Go to Channel Management → Camera Group .
2. Click Add.
Figure 8-7 Add Camera Group
3. Enter Name and Interval(s).
4. Check input channels to be linked and click OK.
Note
• Up to 16 camera groups can be added.
• Each camera group can link up to 64 input channels.
• Interval range: 10 to 65535 seconds.
• The camera groups set by
dierent users are independent. Namely, users can only view and
edit their own camera groups.
DS-1100KI(B) Network Keyboard User Manual
52