HIKVISION DS-1100KI(B) - Page 31

Note
- For the roaming device
supporng one video wall, always keyboard selects the number
1 video wall, whatever the Num is.
- For B20, B21, C20N, C10S decoders (roaming device supporng mulple video walls,
select the corresponding video wall.
- For the device
supporng spliced screen, select the corresponding joined screen.
c. Press Num+MON. Or tap to select a monitor.
• Press Num+MON: Select a monitor directly.
2. Select an input channel or camera group to preview.
• Press Num+CAM to preview the input channel.
• Press Num+CAM-G to preview the camera group.
• Tap
on the upper right corner of the touchscreen and select an input channel to preview.
3. During live view, you can switch live view input channel, capture images, and clip videos.
Switch Channels Press PREV/NEXT to switch to previous/next online input channel.
Capture Images Press the buon on the top of joysck to capture a picture.
Clip Videos Press to start clipping and press it again to stop clipping.
Scene Operaon
You can switch the scene for a region or video wall.
Steps
1. Press Num+REGION, or press Num+WALL.
2. Select a monitor or window on touchscreen.
3. Select a scene as desired.
-
Tap on the upper right corner and select a desired scene.
DS-1100KI(B) Network Keyboard User Manual
18