HIKVISION DS-3 Series - Page 21

Figure 4-4 Congure Port Mirroring
2.
Select the desired port(s) on the port panel as the mirrored port(s), and set the parameters as
required.
Note
You can also click or on the right to batch select or deselect all ports.
Enable
Enable or disable port mirroring of the selected port(s).
Monitoring Port
Only one port can be set as the monitoring port (mirroring port).
Mirroring Direcon
Ingress
The data received by the source port will be under monitoring.
Egress
The data sent by the source port will be under monitoring.
Egress and Ingress
Both the data received by and the data sent from the source port will be under
monitoring.
3.
Click Save.
Note
The latest conguraon will overwrite the previous conguraon.
4.
Oponal: View the mirroring status of each port in the Port Mirroring Status list.
Smart Managed Switch Web User Manual
16