HIKVISION DS-3 Series - Port Poe Configuration

Figure 4-6 Congure High-Priority Port
2.
In High-Priority Port Mode, toggle on Enable to batch enable high-priority ports.
Note
The number of high-priority ports varies with dierent device models. Please refer to the actual
situaon.
All high-priority ports of the switch are enabled, with a higher data transmission priority than
common ports.
4.2 PoE
Conguraon
Click PoE Management in the le navigaon pane.
Figure 4-7 Congure PoE
PoE Watchdog
Enable PoE watchdog to auto-detect and restart IP cameras that do not respond.
Port PoE
Conguraon
Select the desired port(s) on the port panel and enable PoE to supply power to the powered
device(s) connected to the port(s).
Smart Managed Switch Web User Manual
18