HIKVISION DS-3 Series - STP Configuration

3.
Click Save.
4.
Oponal: View the VLAN conguraon informaon of each port in the port VLAN details list.
Figure 4-10 Port VLAN Details
4.4 STP Conguraon
Spanning Tree Protocol (STP) is a layer-2 link management protocol that provides path redundancy
and prevents loops in a network topology. STP uses a spanning-tree algorithm to select one switch
as the root of a spanning tree, and determines the network topology by transming Bridge
Protocol Data Unit (BPDU) packets between devices, helping to create a stable network.
Steps
1.
Go to L2
Conguraon → STP .
Figure 4-11
Congure STP
2.
In Global STP Conguraon, enable STP.
3.
Set STP parameters as required.
Smart Managed Switch Web User Manual
21