HIKVISION DS-3 Series - VLAN Configuration; Add VLAN

Note
You can click or to batch select or deselect all ports.
PoE Status
View the PoE enabling status and output power of PoE ports in the Port PoE Status list.
4.3 VLAN Conguraon
Virtual Local Area Networks (VLANs) separate an exisng physical network into mulple logical
networks. Thus, each VLAN creates its own broadcast domain. With VLANs congured on a switch,
users in the same VLAN can communicate with each other, while users in dierent VLANs are
isolated. In this way,
dierent broadcast domains are isolated, enhancing network security.
4.3.1 Add VLAN
Steps
1.
Click VLAN Management in the
le navigaon pane.
2.
In Global VLAN Conguraon, click Edit.
3.
Click Add.
Figure 4-8 Add VLAN(s)
4.
Select an adding mode.
-
Single: Only one VLAN is added at a
me.
-
Batch: Mulple VLANs are added in a batch.
Note
The maximum number of VLANs that can be added in a batch varies with device models. Please
refer to the actual situaon.
5.
Set VLAN ID.
-
Single: Enter a VLAN ID.
-
Batch: Enter the start VLAN ID and end VLAN ID.
Smart Managed Switch Web User Manual
19