HIKVISION DS-3 Series - Chapter 5 System Management; Network Configuration

Chapter 5 System Management
5.1 Network Conguraon
You can click on the home page to check Hik-Connect connecon status, or go to System
Management → Network Conguraon for network conguraon, cloud plaorm conguraon,
and SADP conguraon.
Network Conguraon
Figure 5-1 Congure Network
Set the IPv4 address, IPv4 subnet mask, default IPv4 gateway, preferred DNS address, and alternate
DNS address as required, or enable DHCP for automac IP address assignment.
Cloud
Plaorm Conguraon
If the device is displayed as oine when you add it to Hik-Partner Pro, you need to modify the DNS
server address and
congure Hik-Connect parameters.
Go to System Management → Network Conguraon → Cloud Plaorm Conguraon , and
ensure that Hik-Connect is enabled. You can also check the operaon code, and bind the device to
your cloud account on Hik-Partner Pro app.
Smart Managed Switch Web User Manual
24