HIKVISION DS-3 Series - Configure Port Isolation; Configure Port Mirroring

4.1.3 Congure Port Isolaon
Port isolaon is a feature to add mulple ports to an isolaon group so that ports in the same
isolaon group cannot communicate with each other. For example, by using port isolaon funcon,
you can achieve the goal of prevenng PCs under dierent ports communicang with each other
without conguring VLANs.
Steps
1.
Go to Security → Port
Isolaon .
Figure 4-3 Congure Port Isolaon
2.
Select the desired port(s) on the port panel.
Note
You can also click or on the right to batch select or deselect all ports.
3.
Enable or disable Port Isolaon as required.
4.
Click Save.
5.
Oponal: View the port isolaon status of each port in the Port Isolaon Status list.
4.1.4
Congure Port Mirroring
Port mirroring is a feature in network switches that allows administrators to monitor trac on one
port (mirrored port) and replicate this data to another port (mirroring port) for analysis. This
replicaon occurs in real-me, allowing an administrator to view a "mirror" or exact duplicate of
the
trac moving on the mirrored port.
Steps
1.
Go to L2 Conguraon → Port Mirroring .
Smart Managed Switch Web User Manual
15