HIKVISION DS-3 Series - Remote Management

Note
●
Aer SADP server is enabled, devices supporng SADP can be searched and informaon about
the devices is displayed.
●
Aer SADP agent is enabled, query requests are sent to the LAN periodically (every minute) for
network topology drawing.
Remote Management
Go to System Management → Network Conguraon → Remote Management for remote device
management via HTTP or HTTPS.
Figure 5-4 Manage Device Remotely
●
HTTP: Set Port Number and click Save.
Note
The HTTP port number should be an integer between 2000 and 65535, or 80 by default.
●
HTTPS: Set the parameters as required and click Save.
HTTPS
Enable or disable HTTPS.
Port Number
If HTTPS is enabled, set the HTTPS port number.
Note
The HTTPS port number should be an integer between 2000 to 65535, or 443 by default.
Redirect HTTP to HTTPS
Enable or disable Redirect HTTP to HTTPS.
Smart Managed Switch Web User Manual
26