HIKVISION DS-3 Series - Log Management

Note
○
The device parameters cannot be recovered once being restored to factory defaults.
○
The device will restart automacally aer being restored to factory defaults.
●
Import Device Parameters: Click to select the conguraon le containing device
parameters, click Import, enter the password for
le decrypon, and then click OK to import the
conguraon le for fast device conguraon.
Note
The device will restart automacally to enter the login page aer the conguraon le is
imported.
5.4 Log Management
System operaon logs can be searched and exported for backup.
Steps
1.
Go to System Management → System Maintenance → Log Management .
Figure 5-12 Manage Logs
2.
Set search condions, including Major Type, Subtype, and Date and Time.
3.
Click Search.
Note
A maximum of 1024 search results can be displayed. Please narrow down the search scope if
there are too many search results.
4.
Oponal: Click Export to export all the search results.
Note
Logs can be exported as a TXT le. A prompt will pop up aer logs are exported successfully.
Smart Managed Switch Web User Manual
30