HIKVISION DS-7200 Series User Manual

User Manual of DS-7200/7300/8100 Series DVR
29
8
VGA
DB15 connector for VGA output. Display local video output and
menu.
9
eSATA
Connects external SATA HDD, DVD-R/W.
10
HDMI
HDMI video output.
11
USB Interface
Connects USB mouse or USB flash memory devices.
12
LAN1/LAN2 Interface
2 RJ45 10M/100M/1000M Ethernet interfaces.
13
Termination Switch
RS-485 termination switch. Up position is not terminated.
Down is terminated with 120Ω resistance.
14
RS-485 Interface
Connector for RS-485 devices. Connect the T+ and T- terminals to
the R+ and R- terminals of PTZ receiver respectively.
KB
Connect the D+ and D- terminals to Ta and Tb terminals of the
controller. For cascading devices, the first DVR’s D+ and D-
terminals should be connected with the D+ and D- terminals of the
next DVR.
Alarm In/Out
Connector for alarm input/output.
15
100~240VAC
100~240VAC power supply.
16
POWER
Switch for turning on/off the device.
17
GND
Ground(needs to be connected when DVR starts up)
The rear panel of DS-8132 DVR is shown in Figure 1.12.
Figure 1.12 Rear Panel of DS-8132
DS-8124 provides 24 video input interfaces on the rear panel.
Table 1.12 Description of Rear Panel
No.
Item
Description
1
VIDEO IN
BNC connector for analog video input.
2
MAIN VIDEO OUT
BNC connector for video output.
SPOT VIDEO OUT
BNC connector for spot video output.
3
CVBS AUDIO OUT
RCA connector for audio output. This connector is synchronized with
CVBS video output.
VGA AUDIO OUT
RCA connector for audio output. This connector is synchronized with VGA
video output.
4
LINE IN
RCA connector for two-way audio input.
5
AUDIO IN (1-4)
RCA connector for audio input.
6
AUDIO IN (5-16)
DB26 connector for audio input.
7
VGA
DB15 connector for VGA output. Display local video output and menu.
8
RS-232
Connector for RS-232 devices.

HIKVISION DS-7200 Series Specifications

General

Brand	HIKVISION
Model	DS-7200 Series
Category	DVR
Language	English