HIKVISION DS-7208HUHI-K2/P User Manual

Digital Video Recorder User Manual
212
 Remote Log Search: Remotely viewing logs that are saved on the device.
 Remote Parameters Settings: Remotely configuring parameters, restoring factory
default parameters and importing/exporting configuration files.
 Remote Camera Management: Remotely enabling and disabling analog camera (s),
and adding, deleting and editing of network camera (s). This function is supported by
HDVR series.
 Remote Serial Port Control: Configuring settings for RS-485 port.
 Remote Video Output Control: Sending remote control panel signal.
 Two-way Audio: Realizing two-way radio between the remote client and the device.
 Remote Alarm Control: Remotely arming (notify alarm and exception message to the
remote client) and controlling the alarm output.
 Remote Advanced Operation: Remotely operating HDD management (initializing HDD,
setting HDD property), upgrading system firmware.
 Remote Shutdown/Reboot: Remotely shutting down or rebooting the device.
Camera Configuration
 Remote Live View: Remotely viewing live video of the selected camera (s).
 Local Manual Operation: Locally starting/stopping manual recording, picture
capturing and alarm output of the selected camera (s).
 Remote Manual Operation: Remotely starting/stopping manual recording, picture
capturing and alarm output of the selected camera (s).
 Local Playback: Locally playing back recorded files of the selected camera (s).
 Remote Playback: Remotely playing back recorded files of the selected camera (s).
 Local PTZ Control: Locally controlling PTZ movement of the selected camera (s).
 Remote PTZ Control: Remotely controlling PTZ movement of the selected camera (s).
 Local Video Export: Locally exporting recorded files of the selected camera (s).
Local Camera Management is provided for the IP cameras only.
3) Click OK to save the settings and exit.
16.4.2 Deleting a User
Step 1 Go to Menu > Configuration > User.
Step 2 Select the user to be deleted from the list, as shown below.

HIKVISION DS-7208HUHI-K2/P Specifications

General

Bit rate	64 Kbit/s
Audio system	2-way
Product color	Black
Video streaming	Yes
Maximum frame rate	30 fps
Audio formats supported	G.711 μ-law
Maximum video resolution	3840 x 2160 pixels
Video compression formats	H.264, H.264+, H.265, H.265+
Analog signal format system	NTSC, PAL
Playback resolutions supported	3840 x 2160, 2560 x 1440, 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768
Number of simultaneously playbacked channels	8 channels
Audio input	4
BNC input ports	8
USB 2.0 ports quantity	1
Number of users	64 user(s)
Ethernet interface type	Fast Ethernet, Gigabit Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF
HDD interface	SATA
Maximum HDD capacity	10000 GB
Number of HDDs supported	2
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
DC voltage	48 V
Power consumption (typical)	60 W

Weight and Dimensions

Depth	320 mm
Height	48 mm
Weight	2000 g