EasyManuals Logo

HIKVISION DS-7208HUHI-K2/P User Manual

HIKVISION DS-7208HUHI-K2/P
246 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
Digital Video Recorder User Manual
79
If H.265+ is enabled, line crossing detection and region entrance detection are not
supported.
For the connnected IP camera, the H.264+ or H.265+ should be supported by the camera
and added to the DVR with the HIKVISION protocol.
You should reboot the device to activate the new settings after enabling the H.264+ or
H.265+.
Step 4 Click More Settings to configure more parameters.
Figure 5-4 More Settings of Record Parameters
Pre-record: The time you set to record before the scheduled time or event. For example,
when an alarm triggered the recording at 10:00, if you set the pre-record time as 5
seconds, the camera records it at 9:59:55.
Post-record: The time you set to record after the event or the scheduled time. For
example, when an alarm triggered the recording ends at 11:00, if you set the post-record
time as 5 seconds, it records till 11:00:05.
Expired Time: The time for keeping the record files in the HDDs, once exceeded, the files
will be deleted. The files will be saved permanently if the value is set as 0. The actual
keeping time for the files should be determined by the capacity of the HDDs.
Redundant Record: Enabling redundant record means you save the record in the
redundant HDD. See Chapter 5.8 Configuring Redundant Recording.
Record Audio: Enable this feature to record the sound and disable it to record the video
without sound.
Video Stream: Main stream, Sub-stream and Dual-stream are selectable for recording.
When you select sub-stream, you can record for a longer time with the same storage
space.
The Redundant Record option is only available when the HDD mode is Group.
Redundant HDD is required for the redundant record function. For detailed information, see
Chapter 14.3.2 Setting HDD Property.
For network cameras, the parameters of Main Stream (Event) are not editable.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7208HUHI-K2/P and is the answer not in the manual?

HIKVISION DS-7208HUHI-K2/P Specifications

General IconGeneral
Bit rate64 Kbit/s
Audio system2-way
Product colorBlack
Video streamingYes
Maximum frame rate30 fps
Audio formats supportedG.711 μ-law
Maximum video resolution3840 x 2160 pixels
Video compression formatsH.264, H.264+, H.265, H.265+
Analog signal format systemNTSC, PAL
Playback resolutions supported3840 x 2160, 2560 x 1440, 1920 x 1080, 1280 x 1024, 1280 x 720, 1024 x 768
Number of simultaneously playbacked channels8 channels
Audio input4
BNC input ports8
USB 2.0 ports quantity1
Number of users64 user(s)
Ethernet interface typeFast Ethernet, Gigabit Ethernet
Supported network protocolsTCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF
HDD interfaceSATA
Maximum HDD capacity10000 GB
Number of HDDs supported2
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
DC voltage48 V
Power consumption (typical)60 W
Weight and Dimensions IconWeight and Dimensions
Depth320 mm
Height48 mm
Weight2000 g

Related product manuals