EasyManuals Logo

HIKVISION DS-7604NI-K1/4P User Manual

HIKVISION DS-7604NI-K1/4P
324 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #146 background imageLoading...
Page #146 background image
Network Video Recorder User Manual
145
7.3 Hot Spare Device Backup
Purpose:
The device can form an N+1 hot spare system. The system consists of several working devices and a
hot spare device; when the working device fails, the hot spare device switches into operation, thus
increasing the reliability of the system.
Please contact dealer for details of models which support the hot spare function.
Before you start:
At least 2 devices are online.
A bidirectional connection shown in the figure below is required to be built between the hot spare
device and each working device.
Set a hot spare
device
Add a hot spare
device on normal
device
Add the normal
device on the hot
spare device
Start Finish
Figure 7-13 Building Hot Spare System
7.3.2 Setting Hot Spare Device
The camera connection will be disabled when the device works in the hot spare mode.
Its highly recommended to restore the defaults of the device after switching the working
mode of the hot spare device to normal mode to ensure the normal operation afterwards.
Step 1 Enter the Hot Spare settings interface.
Menu > Configuration > Hot Spare
Step 2 Set the Work Mode as Hot Spare Mode and click the Apply button to confirm the settings.
Step 3 Reboot the device to make the change take effect.

Table of Contents

Other manuals for HIKVISION DS-7604NI-K1/4P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7604NI-K1/4P and is the answer not in the manual?

HIKVISION DS-7604NI-K1/4P Specifications

General IconGeneral
Maximum resolution3840 x 2160 pixels
Video input channels4 channels
Supported resolutions4K(3840 x 2160)/60Hz, 4K(3840 x 2160)/30Hz, 1920 x 1080P/60Hz, 1600 x 1200/60Hz, 1280 x 1024/60Hz, 1280 x 720/60Hz, 1024 x 768/60Hz
Product colorBlack
Rack mountingNo
LED indicatorsYes
Audio RCA inputs1
USB 2.0 ports quantity2
Ethernet LAN data rates10, 100 Mbit/s
Copper ethernet cabling technology10BASE-T, 100BASE-TX
Power over Ethernet (PoE) ports quantity4
HDD capacity- GB
HDD interfaceSerial ATA
Maximum storage capacity6 TB
Number of HDDs installed-
Output voltage48 V
Power consumption (max)10 W
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth240 mm
Width315 mm
Height48 mm
Weight1000 g

Related product manuals