HIKVISION DS-7608NXI-K2

Steps
1.
Go to Conguraon → Network → Hik-Connect .
2.
Turn on Enable. The service terms will pop up.
1) Read the service terms and privacy statement.
2) Check I have read and agree to Service Terms and Privacy Statement. if you agree with the
service terms and privacy statement..
3) Click OK.
3.
Click
to set vericaon code.
4.
Oponal: Enable Plaorm Time Sync, the device will sync me with the plaorm server instead
of NTP server.
5.
Oponal: Enable Stream Encrypon. It requires to enter vericaon code in remote access and
live view aer this funcon is enabled.
6.
Oponal: Edit Server IP.
7.
Oponal: Enable Sub-Stream Self-Adapve Bitrate. When the network environment is poor, the
device would automacally adjust video bitrate to ensure playing uency.
8.
Bind your device with a Hik-Connect account.
1) Use a smart phone to scan the QR code, and download Hik-Connect app. You can also
download it from hps://appstore.hikvision.com , or the QR code below. Refer to Hik-
Connect Mobile Client User Manual for details.
Figure 5-3 Download Hik-Connect
2) Use Hik-Connect to scan the device QR, and bind the device.
Note
●
If the device is already bound with an account, you can click Unbind to unbind with the
current account.
●
You can also use the QR code in at the upper-le corner to download Hik-Connect and
bind your device.
9.
Click Apply.
Network Video Recorder User Manual
21