EasyManuals Logo

HIKVISION DS-7608NXI-K2 User Manual

HIKVISION DS-7608NXI-K2
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
Figure 5-7 Moon Detecon
2.
Select a camera.
3.
Turn on Enable.
4.
Set VCA Mode as By NVR or By Camera.
By NVR
The
moon detecon event will be analyzed by NVR. The device can analyze videos that
contain human and vehicle. Only the target of selected type (human or vehicle) will trigger
alarms, which can reduce false alarms that are caused by other objects.
By Camera
The
moon detecon event will be analyzed by camera.
5.
Set the
moon detecon area.
-
Click Draw Area or Clear to draw or clear areas. The
rst area is set as full screen by default.
-
Click Full Screen to set the
moon detecon area as full screen. You can drag on the preview
window to draw
moon detecon areas.
6.
Adjust Sensivity. Sensivity allows you to calibrate how easily movement could trigger the
alarm. A higher value results in the more readily to triggers
moon detecon.
7.
Oponal: Set Target Detecon as Human or Vehicle to discard alarms which are not triggered
by human or vehicle.
Note
When VCA Mode is set as By NVR, the human/vehicle target detecon is conicted with 4K/2K
output resoluon, please lower the resoluon.
8.
Set the arming schedule. Refer to Congure Arming Schedule for details.
9.
Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.
10.
Click Apply.
Network Video Recorder User Manual
28

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7608NXI-K2 and is the answer not in the manual?

HIKVISION DS-7608NXI-K2 Specifications

General IconGeneral
Product colorBlack
Rack capacity1U
Rack mountingYes
Input bandwidth80 Mbit/s
Output bandwidth160 Mbit/s
Maximum frame rate30 fps
Maximum resolution3840 x 2160 pixels
Alarm input channels4
Video input channels8 channels
Alarm output channels1
Supported resolutions12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF
Audio formats supportedG.711 A-law, G.711 μ-law, G.722, AAC, G.726
Video formats supportedH.264, H.264+, H.265, H.265+
Wi-FiNo
HDD capacity10000 GB
HDD interfaceSATA
Maximum storage capacity20 TB
Number of HDDs installed0
Number of HDDs supported2
Networking standardsIEEE 802.3af, IEEE 802.3at
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates10, 1000, 100 Mbit/s
Ethernet LAN (RJ-45) ports9
Supported network protocolsTCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP, HTTP, HTTPS
Power over Ethernet (PoE) ports quantity8
Output current2.5 A
Output voltage48 V
Power consumption (typical)15 W
Total Power over Ethernet (PoE) budget80 W
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Sustainability certificatesFederal Communications Commission (FCC), CE
Weight and Dimensions IconWeight and Dimensions
Depth315 mm
Width385 mm
Height52 mm
Weight3000 g

Related product manuals