HIKVISION DS-96000NI-M8 Series - Page 117

Before You Start
The device must be connected to a local area network (LAN) that contains an SMTP mail server.
The network must also be connected to either an intranet or the Internet depending on the
locaon of the e-mail accounts to which you want to send nocaons.
Steps
1. Go to System → Network → Advanced → Email .
Figure 11-3 Email Sengs
2. Congure the email sengs.
Enable Server Authencaon
Check to enable the funcon if the SMTP server requires user authencaon and enter the
user name and password accordingly.
SMTP Server
The IP address of SMTP Server or host name (e.g., smtp.263xmail.com).
SMTP Port
The SMTP port. The default TCP/IP port used for SMTP is 25.
Enable SSL/TLS
Check to enable SSL/TLS if required by the SMTP server.
Sender
The sender's name.
Sender's Address
The sender's address.
Select Receivers
Select the receiver. Up to 3 receivers can be
congured.
Network Video Recorder User Manual
99