HIKVISION DS-96000NI-M8 Series - Search & Export Log Files

Figure 13-13 Log Storage
2. Set Log Storage Mode.
System
Default
Each disk will allocate a certain space to store about 400,000 logs. When logs
are full, old logs will be overwrien.
Custom You can set Log Storage Period and allocate Log Disk for log storage. When the
log disk is full, logs that exceed the period will be overwrien.
3. Click Apply.
13.7.2 Search & Export Log Files
The device operaon, alarm, excepon, and informaon can be stored in log les, which can be
viewed and exported at any me.
Steps
1. Go to Maintenance → Log Informaon .
Figure 13-14 Log Search Interface
2. Set the log search condions, including the me, major type and minor type.
3. Click Search to start searching the log
les.
4. The matched log les will be displayed on the list, as shown below.
Figure 13-15 Log Search Results
Network Video Recorder User Manual
127