HIKVISION DS-96000NI-M8 Series - Add an Alarm Device

Note
For access control devices without the video channel. You need to select trigger channel in
linkage acon conguraon rst. For details, refer to Congure Linkage Acons .
●
Click to edit added access control device informaon.
2.1.2 Add an Alarm Device
Add alarm devices of various manufacturers to receive their alarms. You can congure linkage
acons like triggering recording and full screen monitoring, when an alarm occurs.
Before You Start
Install alarm devices. Ensure network communicaon between alarm devices and video recorder is
well.
Steps
1. Go to Business
Applicaon → IoT → Alarm → Device Management .
2. Click Add.
Figure 2-3 Alarm Device
3. Enter access control device informaon. The informaon must be the same with alarm device to
add.
4. Click Add.
What to do next
●
Click
to view the live video of related channel.
Network Video Recorder User Manual
17