HIKVISION DS-96000NI-M8 Series - Connect to Platform; Configure Hik-Connect

Figure 1-12 Protocol Management
2. Set protocol parameters.
Type
The network camera adopng custom protocol must support geng stream through
standard RTSP.
Path
Contact the manufacturer of network camera for the URL (Uniform Resource Locator) of
geng main stream and sub-stream.
Note
The protocol type and the transfer protocol must be supported by the network camera to add.
3. Click OK.
4. Click Custom Add to add cameras.
5. Set the parameters.
6. Click OK.
1.5 Connect to
Plaorm
1.5.1 Congure Hik-Connect
Hik-Connect provides mobile phone applicaon and plaorm service to access and manage your
video recorder, which enables you to get a convenient remote access to the video security system.
Steps
1. Go to System → Network → Advanced → Plaorm Access .
2. Check Enable to
acvate the funcon. Then the service terms will pop up.
1) Enter Vericaon Code.
Network Video Recorder User Manual
11