HIKVISION DS-96000NI-M8 Series - Line Crossing Detection

Blocklist and Allowlist
You can export the le rst to see its format, and edit it and import it to the device.
7. Click Apply.
Note
Refer to Network Camera User Manual for detailed instrucons for the vehicle detecon.
8. Set the arming schedule. Refer to Congure Arming Schedule .
9. Set the linkage
acons. Refer to Congure Linkage Acons .
6.2.4 Line Crossing Detecon
Line crossing detecon detects people, vehicles, and objects crossing a set virtual line. The
detecon direcon can be set as bidireconal, from le to right or from right to le.
Steps
1. Go to Smart Analysis → Smart Event Sengs → Perimeter Protecon .
2. Select a camera.
3. Click Line Crossing.
Figure 6-6 Line Crossing Detecon
4. Check Enable Line Crossing Detecon.
5.
Oponal: Check Save VCA Picture to save the captured pictures of line crossing detecon.
6. Set the line crossing detecon rules and detecon areas.
1) Select an arming area.
2) Select
Direcon as A<->B, A->B, or A<-B.
A<->B
Only the arrow on the B side shows. When an object goes across the congured line with
both
direcons can be detected and alarms are triggered.
A->B
Network Video Recorder User Manual
56