HIKVISION DS-96000NI-M8 Series - Multi-Target-Type Detection; Loitering Detection

6.2.8 Mul-Target-Type Detecon
Mul-target-type detecon enables the device to detect the faces, human bodies and vehicles
simultaneously in a scene.
Steps
1. Go to Smart Analysis → Smart Event
Sengs → Video Structuralizaon .
2. Select a camera.
3. Check Enable
Mul-Target-Type Detecon.
4. Oponal: Check Save VCA Picture to save the captured intrusion detecon pictures.
5. Set detecon area.
1) Click Draw Area.
2) Adjust the red frame on the image to draw the
detecon area. It is full screen by default.
3) Click Stop Drawing.
6. Set the arming schedule. Refer to
Congure Arming Schedule .
7. Set linkage acons. Refer to Congure Linkage Acons .
8. Click Apply.
6.2.9 Loitering
Detecon
Loitering detecon is used to detect whether a target stays within a specied area longer than the
set
me and trigger alarm for linked acons.
Steps
1. Go to Smart Analysis → Smart Event
Sengs → Other Events .
2. Select a camera.
3. Click Loitering
Detecon.
Figure 6-10 Loitering Detecon
Network Video Recorder User Manual
61