HIKVISION DS-96000NI-M8 Series - Chapter 7 Smart Analysis; Smart Event Settings; People Counting; Heat Map

Chapter 7 Smart Analysis
7.1 Smart Event Sengs
Smart events like vehicle detecon, perimeter protecon (line crossing detecon, intrusion
detecon, etc) can be congured, refer to VCA Event Alarm for conguraon details.
7.2 People Counng
People counng calculates the number of people entering or leaving a certain congured area and
creates daily/weekly/monthly/annual reports for analysis.
Steps
1. Go to Smart Analysis → Smart Report →
Counng .
2. Select a camera.
3. Select the report type.
4. Set Date to analyze.
Figure 7-1 People
Counng
5. Oponal: Click Export to export the report in Microso Excel format.
7.3 Heat Map
Heat map is a graphical representaon of data. The heat map funcon is used to analyze how
many people visited and stayed in a specic area.
Before You Start
The funcon must be supported by the connected IP camera and the corresponding parameters
must be set.
Steps
1. Go to Smart Analysis → Smart Report → Heat Map .
2. Select a camera.
3. Select the report type.
4. Set Date to analyze.
Network Video Recorder User Manual
77