HIKVISION DS-96000NI-M8 Series - Call a Patrol; Set a Pattern

Determines the order the PTZ will follow while cycling through the patrol.
Speed
Denes the speed the PTZ will move from one key point to the next.
Duraon
Refers to the duraon to stay at the corresponding key point.
2) Click Apply to save the key points to the patrol.
6. Other
operaon is as follows.
Table 4-2 Operaon Descripon
Operaon Descripon Operaon Descripon
Select a key point to delete. Edit the added key point.
Adjust the key point order Adjust the key point order
7. Click Apply to save the patrol sengs.
4.5.5 Call a Patrol
Calling a patrol makes the PTZ move according to the predened patrol path.
Steps
1. Click on the quick sengs toolbar of the PTZ camera's live view.
2. Click Patrol on the PTZ control panel.
Figure 4-13 Patrol Conguraon
3. Select a patrol.
4. Click Call to start the patrol.
5.
Oponal: Click Stop to stop the patrol.
4.5.6 Set a
Paern
Paerns can be set by recording the movement of the PTZ. You can call the paern to make the
PTZ move according to the
predened path.
Steps
1. Click on the quick sengs toolbar of the PTZ camera's live view.
Network Video Recorder User Manual
36