HIKVISION DS-96000NI-M8 Series - Face Capture

Steps
1. Go to System → Event → Smart Event .
2. Select the opcal channel of thermography camera.
3. Click Face Capture.
4. Oponal: Check Save VCA Picture to save the captured pictures of face detecon.
5. Set the arming schedule. Refer to Congure Arming Schedule .
6. Set linkage acons. Refer to Congure Linkage Acons . If you only requires to implement
linkage acons when the thermography camera detects abnormal temperature. Click More, and
check Abnormal Body Temperature.
Note
The abnormal temperature is detected and dened by the thermography camera.
7. Click Audio Alert, and check Normal Temperature or Abnormal Temperature to enable desired
audio alert when normal or abnormal temperature is detected by the camera.
Figure 6-4 Audio Alert
8. Click Apply.
What to do next
●
You can check of Target Detecon in live view to view detecon results.
●
You can go to File Management → Smart Search → Search by Appearance to search
detecon
results.
6.2.2 Face Capture
The face capture detects and captures faces appearing in the scene. Linkage acons can be
triggered when a human face is detected.
Steps
1. Go to Smart Analysis → Smart Event Sengs → Facial Recognion .
2. Click Face Capture.
Network Video Recorder User Manual
54