HIKVISION DS-96000NI-M8 Series - Search the Iot Record

Steps
1. Click of an added IoT device.
2. Check OSD Display on Event Conguraon interface.
3. Select Trigger Channel.
4. Click OSD Display Conguraon.
Figure 2-5 OSD Conguraon
5. Select items, including Device Name, Card No., Event Name, Name, and ID No., to display on
live view image. The items are only for access control devices.
6.
Congure OSD properes.
Overlay Mode - Scroll
The OSD will automacally scroll to show the new alarm informaon.
Overlay Mode - Page
When the current OSD cannot show more alarm informaon, it will automacally turn to new
page.
Privacy
Sengs
Enter privacy informaon you want to mask. Masked privacy informaon will be replaced by
*. Privacy informaon includes Event, Device, Card, Name, and ID.
7. Adjust the quadrilateral of yellow frame on the preview window to adjust IoT OSD size and
posion.
8. Click Apply.
2.4 Search the IoT Record
Search alarms by me, by event type, or by channel.
Steps
1. Go to event record interface.
-
Access control: Go to Business
Applicaon → IoT → Access Control → Card Swiping Record .
-
Alarm device: Go to Business Applicaon → IoT → Alarm → Search Data .
Network Video Recorder User Manual
19