HIKVISION DS-K1A802A Series

Note
The exported details are saved in CSV format.
6.9.8 Aendance Stascs
You can check the original aendance record, generate and export the aendance report based on
the calculated
aendance data.
Get Original Aendance Record
You can search the employee's aendance me, aendance status, check point, etc. in a me
period to get an original record of the employees.
Before You Start
●
You should add
organizaons and persons in Person module and the persons has swiped card.
For details, refer to Person Management .
●
Calculate the aendance data.
Note
○
The client will automacally calculate the previous day's aendance data at 1:00 am on the
next day.
○
Keep the client running at 1:00 am or it cannot calculate the previous day's aendance data
automacally. If not calculated automacally, you can calculate the aendance data manually.
For details, refer to
Manually Calculate Aendance Data .
Steps
1.
Enter the Time &
Aendance module.
2.
Click Aendance Stascs → Original Records .
3.
Set the
aendance start me and end me that you want to search from.
4.
Set other search condions, such as department, person name, and employee No.
5.
Oponal: Click Get from Device to get the aendance data from the device.
6.
Oponal: Click Reset to reset all search condions and edit the search condions again.
7.
Click Search.
The result displays on the page. You can view the employee's required
aendance status and
check point.
8.
Oponal: Aer searching the result, perform one of the following operaons.
Generate Report
Click Report to generate the aendance report.
Export Report Click Export to export the results to the local PC.
DS-K1A802A Series Fingerprint Time Aendance Terminal User Manual
101