HIKVISION DS-K1A802A Series - Chapter 5 Local Settings

Chapter 5 Local Sengs
5.1 Select Language
You can select a language for the device system.
Aer the device acvaon, you can select a language for the device system.
By default, the system language is English.
Note
Aer you change the system language, the device will reboot automacally.
5.2 Add Administrator
Aer the device acvaon and system language selecon, you are required to add an
administrator. You can set the administrator's user name, the card No. You can also add the user
ngerprint, the department, the authencaon mode, and the role.
Steps
1.
Move the cursor and select User → New to enter the New page.
DS-K1A802A Series Fingerprint Time Aendance Terminal User Manual
12