HIKVISION DS-K1A802A Series

6.9 Time and Aendance
The Time and Aendance module provides mulple funconalies to track and monitor when
employees start and stop work, and full control of employees working hours such as late arrivals,
early departures, me taken on breaks and absenteeism.
Note
In this secon, we introduce the conguraons before you can geng the aendance reports. The
access records recorded aer these conguraons will be calculated in the stascs.
6.9.1 Congure Aendance Parameters
You can congure the aendance parameters, including the general rule, overme parameters,
aendance check point, holiday, leave type, etc.
Congure
General Rule
You can congure the general rule for aendance calculaon, such as the week beginning, month
beginning, weekend, absence, etc.
Steps
Note
The parameters congured here will be set as default for the newly added me period. It will not
aect the existed one(s).
1.
Enter Time & Aendance module.
2.
Click Aendance Sengs → General Rule .
3.
Set the day as week beginning and the date as month beginning.
4.
Select the day(s) as weekend.
5.
Set absence parameters.
6.
Click Save.
Congure
Overme Parameters
You can congure the overme parameters for workday and non-workday, including overme
level, pay rate, aendance status for overme, etc.
Steps
1.
Enter Time & Aendance module.
2.
Click
Aendance Sengs → Overme .
3.
Set required informaon.
DS-K1A802A Series Fingerprint Time Aendance Terminal User Manual
87