HIKVISION DS-K1A802A Series

Note
The aendance status will be valid within the congured schedule. For example, if set the Up
key as check in and the Down key as check out, and set the check in's schedule as Monday
08:00, and check out's schedule as Monday 17:00, the valid person's authencaon before
17:00 on Monday will be marked as check in. And the valid person's
authencaon aer 17:00
on Monday will be marked as check out.
5.
Press ESC and save the sengs.
Result
Enter the
inial page, the current aendance mode will be displayed on the page. When you
authencate on the inial page, the authencaon will be marked as the congured aendance
status according to the congured schedule.
5.6.2 Set Manual
Aendance
Set the aendance mode as manual, and you can select a status manually when you take
aendance.
Before You Start
Add at least one person, and set the person's
authencaon mode. For details, see Person
Management .
Steps
1.
Move the cursor and select System → A. Status to enter the Aendance Status page.
2.
Move the cursor and select
Aendance Mode and set the aendance mode as Manual.
Figure 5-6 Manual Mode
DS-K1A802A Series Fingerprint Time Aendance Terminal User Manual
23