HIKVISION DS-K1A802A Series

5.
Press ESC and select Yes to save the sengs.
5.7.5 Export Aendance Report
Export the aendance record, the aendance report, the abnormal aendance record and the
aendance management schedule.
Steps
1.
Plug in a USB ash drive in the USB interface.
Note
●
The supported USB ash drive format is FAT32.
●
The USB ash drive memory should be from 1G to 32G. Make sure the free space of the USB
ash drive is more than 512 M.
2.
Move the cursor and select Report. Press OK to enter the Report page.
Figure 5-17 Report Page
3.
Select a report to export.
-
When
exporng aendance record, aendance report, and abnormal aendance record, you
should enter the device No. aendance start date and end date.
Note
The device No. is for dierenang the reports of dierent devices.
-
When
selecng Aendance Management Schedule, shi sengs table, normal shi schedule
table and the man-hour
shi schedule table will be exported.
DS-K1A802A Series Fingerprint Time Aendance Terminal User Manual
35