HIKVISION DS-K1A802A Series - Page 55

Figure 5-19 Time Page
2.
Edit the parameters.
Date
The displayed date on the device.
Note
The available range is from 1970.01.01 to 2037.12.31.
Time
The displayed me on the device.
DST
Select to enable or disable the DST. When the DST is enabled, you can set the DST bias me,
the start me and the end me.
●
DST Bias: You can select 30min, 60min, 90min and 120min.
●
Start: Set the start
me of the DST.
●
End: Set the end
me of the DST.
3.
Press ESC and select Yes to save the sengs and exit the page.
DS-K1A802A Series Fingerprint Time Aendance Terminal User Manual
38