HIKVISION DS-K3BC430LX-868 - 5.3 Activate via Web Browser; 6 Quick Operation via Web Browser; 6.1 Time Settings

Cauon
The password strength of the device can be automacally
checked. We highly recommend you change the password of
your own choosing (using a minimum of 8 characters, including
at least three kinds of following categories: upper case leers,
lower case leers, numbers, and special characters) in order to
increase the security of your product. And we recommend you
change your password regularly, especially in the high security
system, changing the password monthly or weekly can
beer
protect your product.
Proper conguraon of all passwords and other security
sengs is the responsibility of the installer and/or end-user.
Note
Characters containing admin and nimda are not supported to
be set as acvaon password.
7. Click OK to acvate the device.
5.3 Acvate via Web Browser
You can acvate the device via the web browser.
Steps
1. Enter the device default IP address (192.0.0.64) in the address
bar of the web browser, and press Enter.
Note
Make sure the device IP address and the computer's should be
in the same IP segment.
2. Create a new password (admin password) and conrm the
password.
Cauon
STRONG PASSWORD RECOMMENDED-We highly recommend
you create a strong password of your own choosing (using a
minimum of 8 characters, including upper case leers, lower
case leers, numbers, and special characters) in order to
increase the security of your product. And we recommend you
reset your password regularly, especially in the high security
system,
reseng the password monthly or weekly can beer
protect your product.
Note
Characters containing admin and nimda are not supported to
be set as acvaon password.
3. Click Acvate.
4. Edit the device IP address. You can edit the IP address via the
SADP tool, the device, and the client soware.
6 Quick
Operaon via Web Browser
6.1 Time Sengs
19