HIKVISION DS-K3BC430LX-868 User Manual

Manual
By default, the device me should be synchronized manually. You can set the device me
manually or check Sync. with Computer Time to synchronize the device me with the
computer's
me.
Server IP Address/NTP Port/Interval
You can set the server IP address, NTP port, and interval.
7.5.3 Set DST
Steps
1.
Click
Conguraon → System → System Sengs → Time Sengs .
2.
Enable DST.
3.
Set the DST start me, end me and bias me.
4.
Click Save to save the sengs.
7.5.4 Change Administrator's Password
Steps
1.
Click
Conguraon → User Management .
2.
Click .
3.
Enter the old password and create a new password.
4.
Conrm the new password.
5.
Click OK.
Cauon
The password strength of the device can be automacally checked. We highly recommend you
change the password of your own choosing (using a minimum of 8 characters, including at least
three kinds of following categories: upper case leers, lower case leers, numbers, and special
characters) in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the password monthly
or weekly can
beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
7.5.5 Online Users
The informaon of users logging into the device is shown.
Go to Conguraon → System → User Management → Online Users to view the list of online
users.
DS-K3BC430LX Series Swing Gate
34

HIKVISION DS-K3BC430LX-868 Specifications

General

Brand	HIKVISION
Model	DS-K3BC430LX-868
Category	Fencing & Gates
Language	English