HIKVISION DS-K3BC430LX-868 - Set Port Parameters; 7.5.8 Event Linkage

Set Port Parameters
Set the HTTP, HTTPS, HTTP Listening parameters.
Click Conguraon → Network → Network Service → HTTP(S) .
Figure 7-6 Network Service
HTTP
It refers to the port through which the browser accesses the
device. For example, when the HTTP Port is modied to 81, you
need to enter
hp://192.0.0.65:81 in the browser for login.
HTTPS
Set the HTTPS for accessing the browser. Cercate is required
when accessing.
HTTP Listening
The device can send alarm informaon to the event alarm IP
address or domain name via HTTP protocol/HTTPS protocol.
Edit the event alarm IP address or domain name, URL, port,
and protocol.
Note
The event alarm IP address or domain name should support
the HTTP protocol/HTTPS protocol to receive the alarm
informaon.
7.5.8 Event Linkage
Set linked acons for events.
Steps
1. Click
Conguraon → Event → Basic Event → Event Linkage to
enter the page.
Figure 7-7 Event Linkage
2. Set event source.
-
If you choose Linkage Type as Event Linkage, you need to
select event types from the drop-down list.
-
If you choose Linkage Type as Card Linkage, you need to
enter the card No. and select the card reader.
26