EasyManuals Logo

HIKVISION DS-K3BC430LX-868 User Manual

HIKVISION DS-K3BC430LX-868
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
7.5.6 View Device Arming/Disarming Informaon
View device arming type and arming IP address.
Go to
Conguraon → User Management → Arming/Disarming Informaon .
You can view the device arming/disarming informaon. Click Refresh to refresh the page.
7.5.7 Network Sengs
Set TCP/IP and HTTP(S).
Set Basic Network Parameters
Click Conguraon → Network → Network Sengs → TCP/IP .
Figure 7-5 TCP/IP Sengs Page
Set the parameters and click Save to save the sengs.
NIC Type
Select a NIC type from the drop-down list. By default, it is Auto.
DHCP
If you uncheck the funcon, you should set the IPv4 address, IPv4 subnet mask, IPv4 default
gateway, Mac address, and MTU.
If you check the
funcon, the system will allocate the IPv4 address, IPv4 subnet mask, the IPv4
default gateway
automacally.
DS-K3BC430LX Series Swing Gate
35

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-K3BC430LX-868 and is the answer not in the manual?

HIKVISION DS-K3BC430LX-868 Specifications

General IconGeneral
BrandHIKVISION
ModelDS-K3BC430LX-868
CategoryFencing & Gates
LanguageEnglish

Related product manuals