HIKVISION DS-K3G501X Series User Manual

adhesive at the lm cung posion. It is recommended to use WD-40 protecve liquid to wipe
aer tearing the lm.
●
The dimension is as follows.
Figure 3-2 Dimension
1.
Prepare for the installaon tools, check the components, and prepare for the installaon base.
2.
Seal the
boom of the turnsle to avoid water from entering.
3.
Move the pedestals to the corresponded posions.
Note
Make sure the installaon holes on the pedestals and the base are aligned with each other.
4.
Secure the pedestals with expansion bolts.
Note
●
Do not immerse the pedestal in the water. In special circumstances, the immersed height
should be no more than 150 mm.
DS-K3G501X Series Tripod Turnsle
7

HIKVISION DS-K3G501X Series Specifications

General

Brand	HIKVISION
Model	DS-K3G501X Series
Category	Turnstiles
Language	English