EasyManua.ls Logo

HIKVISION DS-K3G501X Series - Appendix A. DIP Switch; DIP Switch Description; DIP Switch Corresponded Functions

HIKVISION DS-K3G501X Series
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix A. DIP Switch
A.1 DIP Switch Descripon
The DIP switch is on the access control board. No.1 and No 2 is from the low bit to the high bit.
Figure A-1 DIP Switch
When the switch is towards ON, it means the switch is enabled, otherwise, the switch is o.
A.2 DIP Switch Corresponded
Funcons
Note
Aer seng the DIP switch, you should reboot the device, or the funcon cannot take eect.
The 2-bit DIP switch corresponded funcons on the access control board are as follows:
Bit
Device Mode Funcon Decimal Value DIP Switch
Address Diagram
1 Keyfob Paring
Mode
Disable Keyfob
Paring Mode
0
Enable Keyfob
Paring Mode
1
DS-K3G501X Series Tripod Turnsle
74

Table of Contents

Related product manuals