HIKVISION DS-K3G501X Series - Page 67

Steps
1.
Enter Person module.
Note
For the rst me you enter Person module, a window pops up, and you can set the rules to
generate person ID (leers and numbers supported) when adding person. When geng person
informaon from device, if there are no person IDs, the person IDs will be generated according
to the rule.
2.
Select an organizaon in the organizaon list to add the person.
3.
Click Add to open the adding person window.
The Person ID will be generated
automacally.
4.
Enter the basic informaon including person name, telephone number, email address, validity
period, etc.
Figure 7-2 Congure Basic Informaon
Note
Once validity period expired, the credenals and access control sengs of the person will be
invalid and the person will have no authorizaon to access the doors\oors. You can click Extend
to extend the person's validity period for 1 month, 3 months, 6 months, or 1 year.
5.
Conrm to add the person.
-
Click Add to add the person and close the Add Person window.
-
Click Add and New to add the person and
connue to add other persons.
DS-K3G501X Series Tripod Turnsle
55