HIKVISION DS-KD9203 Series - Chapter 5: Activation; Local Device Activation

Chapter 5 Acvaon
5.1 Acvate Device Locally
You are required to acvate the device rst by sengs a strong password for it before you can use
the device.
Steps
1.
Power on the device to enter the acvaon page automacally.
2.
Create a password and conrm it.
Table 5-1 Number Buon Descripon
No. Descripon No. Descripon
1 1 6 6mnoMNO
2 2abcABC 7 7pqrsPQRS
3 3defDEF 8 8tuvTUV
4 4ghiGHI 9 9wxyzWXYZ
5 5jklJKL 0 0
Hold 0 to enter special characters.
Table 5-2 Number
Buon Descripon
No. Descripon No. Descripon
1 1,.#? 6 6_=+
2 2!@% 7 7[];:
3 3^$* 8 8"|<
4 4( )\ 9 9>{}
5 5&/-
Note
●
The password required 8 to 16 characters.
●
The way to enter the password, take buon 2 as an example: Press 2 to enter the number '2'
or hold 2 for 1.5 s and press 2 again to enter the character 'a'.
●
When you have entered the password, press # to switch to
conrm the password.
●
Press * to delete the wrong charater.
3.
Press # to select language.
Video Intercom Face Recognion Door Staon User Manual
14