HIKVISION DS-KD9203 Series User Manual

●
Reboot: Click Reboot to reboot the device.
●
Restore
Click Restore to reset all the parameters, except the IP parameters and user informaon, to
the default sengs.
Default
Click Default to restore all parameters to default sengs.
●
Export parameters:
1. Select Device Parameters, and click Export to pop up the dialog box.
2. Set and conrm the encrypon password.
3. Click OK to export parameters.
●
Import Cong. File:
1. Click browse icon to select the conguraon le.
2. Click Import and enter the encrypon password to import.
●
Upgrade: Click browse icon to select the upgrade
le.
Note
The upgrading process will last 1 to 10 minutes, do not power o during the upgrading. The
device reboots automacally aer upgrading.
Authencaon
Click Security → Authencaon to enter the sengs page. On the page, you can select RTSP
Authencaonaccording to your actual needs.
Click Save to enable the sengs.
Security Service
Click Security → Security Service to enter the sengs page. On the page, you can enable SSH
according to your actual needs.
Click Save to enable the
sengs.
User Management
Click User Management to enter the sengs page.
Administrator can edit the permission for the users.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum of
8 characters, including at least three kinds of following categories: upper case leers, lower case
leers, numbers, and special characters) in order to increase the security of your product. And we
recommend you change your password regularly, especially in the high security system, changing
the password monthly or weekly can beer protect your product.
Online Users
Click User Management → Online Users to enter the page.
Video Intercom Face Recognion Door Staon User Manual
25

HIKVISION DS-KD9203 Series Specifications

General

Brand	HIKVISION
Model	DS-KD9203 Series
Category	Intercom System
Language	English