HIKVISION DS-KD9203 Series - Page 44

Select the resoluon of the video output.
Bitrate Type
Select the bitrate type to constant or variable.
Video Quality
When bitrate type is selected as Variable, 6 levels of video quality are selectable.
Frame Rate
Set the frame rate. The frame rate is to describe the frequency at which the video stream is
updated and it is measured by frames per second (fps). A higher frame rate is advantageous
when there is movement in the video stream, as it maintains image quality throughout.
Max. Bitrate
Set the max. bitrate from 32 to 16384 Kbps. The higher value corresponds to the higher video
quality, but the
beer bandwidth is required.
Video Encoding
The device supports H.264.
I Frame Interval
Set I Frame Interval from 1 to 400.
4.
Click Save to save the
sengs.
Audio Parameters
Steps
1.
Click Video/Audio → Audio to enter the
sengs page.
Figure 7-8 Audio Sengs
2.
Congure the stream type and the audio encoding type.
Stream Type
Video Intercom Face Recognion Door Staon User Manual
33