Video Intercom Master Station·User Manual
5
2 Before You Start
For the first time use of the device, you are required to activate the device and set the
device password. You can activate the device locally or remotely via internet with Batch
Configuration Tool, or with iVMS-4200 client software.
To remotely activate the device with Batch Configuration Tool or
iVMS-4200, refer to Chapter 4, and Chapter 5.
To configure key parameters of the device on the user interface of master
station, you are required to enter the admin (configuration) password.
The default admin password is 888999.
You must change the default credential to protect against unauthorized access to the
product. Please refer to 3.4.1 and 4.4.2 for changing password.
To Next Page
Loading...
Need help?
General
