Video Intercom Master Station·User Manual
16
3.5 Video Call Settings
3.5.1 Callling Resident
Steps:
1. Press the tab on the touch screen to enter the residents calling
interface.
2. Enter the corresponding residents’ Room No..
3. Press the tab to start a video intercom call.
4. Press the tab to stop the video intercom call.
The room No. format should be like 1-1-1-102 as Community 1, Building 1, Unit 1, and
Room 102. The community No. can be omitted.
Switch to on the upper right corner to enable the camera function.
Figure 3-15 Call Resident Interface
3.5.2 Callling Master Station
Master Stations can call each other by entering the master station No..
Steps:
1. Press the tab to enter the resident calling interface.
2. Enter the corresponding master stations’ No..